Our new system consists of a 3mm thin 150W / m2 cable mat which can be rolled out and cut to shape to fit any room. Within the mat is a thin 3mm heating cable which is pre-woven into a 500mm wide glass fibre mesh. The mat should be laid directly under the surface to be heated, pressed down and then tiled over, you may wish to add self-levelling screed or cover it with a thin layer of tile adhesive to ensure that the surface is flat.
Share Product
| Cable Type | Single Core Heating Cable |
| Cable Insulation | ETFE |
| Mat Thickness | 3 mm |
| Cold Lead | At Two ends of the Mat |
| Cable Carrier | Glass Fibre Mesh |
| Width | 0.5 m |
| Supply Voltage | 230 Vac 50 HZ |
| Heat Output | 150 W/m2 |
| Model | Wattage | Mat Area | Cable | Resistance |
| `@230V | (m2) | Length(m) | Ohms | |
| WSUTHM-E- 01 | 150 | 1.00 | 13.0 | 352.67 |
| WSUTHM-E- 1.5 | 225 | 1.50 | 19.6 | 235.11 |
| WSUTHM-E- 02 | 300 | 2.00 | 26.1 | 176.33 |
| WSUTHM-E- 2.5 | 375 | 2.50 | 32.6 | 141.07 |
| WSUTHM-E- 03 | 450 | 3.00 | 39.1 | 117.56 |
| WSUTHM-E- 3.5 | 525 | 3.50 | 45.7 | 100.76 |
| WSUTHM-E- 04 | 600 | 4.00 | 52.2 | 88.17 |
| WSUTHM-E- 4.5 | 675 | 4.50 | 58.7 | 78.37 |
| WSUTHCM-E- 05 | 750 | 5.00 | 65.2 | 70.53 |
| WSUTHCM-E- 06 | 900 | 6.00 | 78.3 | 58.78 |
| WSUTHCM-E- 07 | 1050 | 7.00 | 91.3 | 50.38 |
| WSUTHCM-E- 08 | 1200 | 8.00 | 104.3 | 44.08 |
| WSUTHCM-E- 09 | 1350 | 9.00 | 117.4 | 39.19 |
| SWUTHCM-E- 10 | 1500 | 10.00 | 130.4 | 35.27 |
| Cable Type | Dual Core Heating Cable |
| Cable Insulation | FEP / ETFE / XLPE |
| Mat Thickness | 4 to 5 mm |
| Cold Lead | At Two ends of the Mat |
| Cable Carrier | Glass Fibre Mesh |
| Width | 0.5 m |
| Supply Voltage | 230 Vac 50 HZ |
| Heat Output | 100 to 165 W/m2 |
| Model | Mat Area | Wattage according different Cable Spacing | |||
| (m2) | 70 mm | 87.5mm | 105 mm | 115 mm | |
| Width 0.5m | 100W/m2 | 125W/m2 | 150W/m2 | 165W/m2 | |
| WDUTHM-F-XXX-01 | 1.00 | 100.0 | 125.0 | 150.0 | 165.0 |
| WDUTHM-F-XXX-1.5 | 1.50 | 150.0 | 187.5 | 225.0 | 247.5 |
| WDUTHM-F-XXX-2.0 | 2.00 | 200.0 | 250.0 | 300.0 | 330.0 |
| WDUTHM-F-XXX-2.5 | 2.50 | 250.0 | 312.5 | 375.0 | 412.5 |
| WDUTHM-F-XXX-3.0 | 3.00 | 300.0 | 375.0 | 450.0 | 495.0 |
| WDUTHM-F-XXX-3.5 | 3.50 | 350.0 | 437.5 | 525.0 | 577.5 |
| WDUTHM-F-XXX-4.0 | 4.00 | 400.0 | 500.0 | 600.0 | 660.0 |
| WDUTHM-F-XXX-4.5 | 4.50 | 450.0 | 562.5 | 675.0 | 742.5 |
| WDUTHM-F-XXX-5.0 | 5.00 | 500.0 | 625.0 | 750.0 | 825.0 |
| WDUTHM-F-XXX-6.0 | 6.00 | 600.0 | 750.0 | 900.0 | 990.0 |
| WDUTHM-F-XXX-7.0 | 7.00 | 700.0 | 875.0 | 1050.0 | 1155.0 |
| WDUTHM-F-XXX-8.0 | 8.00 | 800.0 | 1000.0 | 1200.0 | 1320.0 |
| WDUTHM-F-XXX-9.0 | 9.00 | 900.0 | 1125.0 | 1350.0 | 1485.0 |
| WDUTHM-F-XXX-10.0 | 10.00 | 1000.0 | 1250.0 | 1500.0 | 1650.0 |
| Note: XXX- (100,125,150,165) W/m2; Y: FEP / ETFE / XLPE | |||||
