VDE Approved Heating Mat Wipe Hotwire special mat has uniform thickness with 4.5 mm diameter cable. Its heat output ranges from 100 to 165 W/m². The mat can be rolled out and cut to shape to fit any room. The system has the preformed cable attached to a 500mm wide glass fibre mesh. The mat should be laid directly under the surface to be heated, pressed down and then tiled over; IEC 60800 compliant
Share Product
| Cable Type | Dual Core Heating Cable |
| Cable Insulation | PTFE |
| Mat Thickness | 5 mm |
| Cold Lead | At one ends of the Mat |
| Cable Carrier | Glass Fibre Mesh. 0.5 mm Wide |
| Width | 0.5 m |
| Supply Voltage | 230 Vac 50 HZ. |
| Heat Output | 150W/m² 100 to 165 W/m² |
| Model | Mat Area | Wattage according different Cable Spacing | |||
| (m2) | 70 mm | 87.5mm | 105 mm | 115 mm | |
| Width 0.5m | 100W/m2 | 125W/m2 | 150W/m2 | 165W/m2 | |
| WDUTHM-P-XXX-01 | 1.00 | 100.0 | 125.0 | 150.0 | 165.0 |
| WDUTHM-P-XXX-1.5 | 1.50 | 150.0 | 187.5 | 225.0 | 247.5 |
| WDUTHM-P-XXX-2.0 | 2.00 | 200.0 | 250.0 | 300.0 | 330.0 |
| WDUTHM-P-XXX-2.5 | 2.50 | 250.0 | 312.5 | 375.0 | 412.5 |
| WDUTHM-P-XXX-3.0 | 3.00 | 300.0 | 375.0 | 450.0 | 495.0 |
| WDUTHM-P-XXX-3.5 | 3.50 | 350.0 | 437.5 | 525.0 | 577.5 |
| WDUTHM-P-XXX-4.0 | 4.00 | 400.0 | 500.0 | 600.0 | 660.0 |
| WDUTHM-P-XXX-4.5 | 4.50 | 450.0 | 562.5 | 675.0 | 742.5 |
| WDUTHM-P-XXX-5.0 | 5.00 | 500.0 | 625.0 | 750.0 | 825.0 |
| WDUTHM-P-XXX-6.0 | 6.00 | 600.0 | 750.0 | 900.0 | 990.0 |
| WDUTHM-P-XXX-7.0 | 7.00 | 700.0 | 875.0 | 1050.0 | 1155.0 |
| WDUTHM-P-XXX-8.0 | 8.00 | 800.0 | 1000.0 | 1200.0 | 1320.0 |
| WDUTHM-P-XXX-9.0 | 9.00 | 900.0 | 1125.0 | 1350.0 | 1485.0 |
| WDUTHM-P-XXX-10.0 | 10.00 | 1000.0 | 1250.0 | 1500.0 | 1650.0 |
| Note: XXX- (100,125,150,165) W/m2 | |||||